[ Archive Contents | Old Forum | New Forum ]

Re: New Win98 Install and problems with secondary IDE/cdrom

From: Larry
Date: 21 Oct 1999
Time: 09:34:32
Remote Name:


Bruce, have you had Windows autodect the hardware again? Or, try the refresh button in the device manager. I am a bit rusty on the 2940, but you may have a port or IRQ conflict with the host adapter--not likely. You may need to rework the config.sys and autoexec.bat for the CD-ROM. Try removing the rem in front of the CD-ROM line in the autoexec.bat. Try removing the IDE hd drivers in Windows and reinstlling them. Is the SCSI CD-ROM driver installed; shouldn't be. This is a hard one to trouble-shoot remotely. Larry

| Home | Reviews | How to | From the Shop | Guides | FAQ | New Forum | Links |
ProductsServices | News | About | Advertising | Contact |
| Privacy Statement | Location |