Go to Home Page GuidesHow to ArticlesReviewsForumsFrequently Asked QuestionsNewsLinksPotpourri

Site Search

 

Hang-up IC Host Dial-up MODEM from an ICS Client
Last updated: 3/13/02

Q. How can one hang-up a dial-up MODEM on a Windows 9x/Me ICS host computer from an ICS client computer?

A.  It can't be done with ICS according to Microsoft (Dial-Up Connection in ICS Does Not Prompt to Disconnect on Client (Q237806) at http://support.microsoft.com/default.aspx?scid=kb;en-us;Q237806&SD=MSKB&), and that behavior is by design.  Besides the person using the host or another client might not like it.  However... Chris Giles sent me an E-Mail on this FAQ and stated:

"It can easily and elegantly be done by installing the Remote Disconnection Utility, freeware from http://www.twiga.ltd.uk. Works like a charm."

Copyright, Disclaimer, and Trademark Information Copyright © 1996-2006 Larry F. Byard.  All rights reserved. This material or parts thereof may not be copied, published, put on the Internet, rewritten, or redistributed without explicit, written permission from the author.