Go to Home Page GuidesHow to ArticlesReviewsForumsFrequently Asked QuestionsNewsLinksPotpourri

Site Search

 

HOW TO BUILD YOUR OWN PENTIUM III COMPUTER
CONTENTS
Last updated:  6/3/99

Introduction

Setup the Chassis

Setup the Motherboard

Install the Motherboard

Install the Display Adapter

Install the Floppy and Hard Disk Drives

Install the CD-ROM Drive

Plug-in and Power-up the Drives

Connect the Remaining Wires

Flash the BIOS

Setup the CMOS

Copyright, Disclaimer, and Trademark Information Copyright © 1996-2006 Larry F. Byard.  All rights reserved. This material or parts thereof may not be copied, published, put on the Internet, rewritten, or redistributed without explicit, written permission from the author.