DUX COMPUTER DIGEST

 

Site Search

Site Info

Home » Forums » Forum Archives » Networking and Internet Sharing » Topic # 1179

need help setting up home network with a hub.
cynthia38 Sep-02-01 10:51 PM
cynth:))
"Hello everyone I am new here. Would like to set up a home network with 2pc. this is what I have:
pc1: has cable modem, 2 nic cards.
pc2: has 1 nic card installed.
"I want to set up the network so the pc2 can also use the internet from pc1."
I have a 5 port hub.
Where do I begin and where will it end

By the way great information in this forum, I am hooked, reading all the time . cynth:)

1. RE: need help setting up home network with a hub.
BBATES Sep-03-01 06:46 AM
In response to message 0
You will need to use ICS or buy a router. Larry has a great "how to" to set up ICS, and a router for that matter.

2. RE: need help setting up home network with a hub.
lbyard Sep-03-01 04:28 PM
In response to message 1
Also suggest checking the Internet Connection Sharing FAQs. Larry

3. RE: need help setting up home network with a hub.
cynthia38 Sep-04-01 02:04 AM
In response to message 1
cynth:))

You need to use a router along with a hub????
one cannot get the same access with just the hub?

confused


4. RE: need help setting up home network with a hub.
lbyard Sep-04-01 05:23 AM
In response to message 3
You can use a software solution to share a connection with a hub. A router is a better way of doing it, especially for broadband (cable or DSL) Internet connections. Larry

Q. What are the ways to share a broadband (cable or DSL MODEM) Internet connection?

A. There are few ways to do it. One is to purchase another IP address from your service provider. Most service providers charge a monthly fee for additional IPs. The best way is to purchase a broadband router such as the SMC Barricade (http://duxcw.com/digest/Reviews/Network/smc/smc7004br/smc7004br.htm). That is what I use. They cost about $100.

The Barricade has serial port for an external dial-up MODEM and a printer port and printer server. A printer can be connected to the Barricade and shared by computers on the local network. Not all printers will work with it. Many routers do not accommodate an Internet connection via an external dial-up MODEM and do not have printer port and server.

The Barricade can be connected to an Ethernet hub or switch hub can to expand the network and Internet sharing to more than the four PCs directly supported by the router.

There are also single port routers on the market, routers that do not include an Ethernet switch or hub (http://duxcw.com/faq/network/hubsw.htm). I will review one shortly.

Another way to do it is with a software solution. There are two flavors: a proxy server and a NAT (Network Address Translator). I have found that a NAT works best for a small network. Windows 98 Second Edition (SE) and Millennium (Me) include ICS (Internet Connection Sharing; http://duxcw.com/digest/Howto/network/win98se/intro.htm and http://duxcw.com/digest/Howto/network/win98se_cab/intro.htm). It works OK for basic browsing and E-Mail functions, but has problems with some network games and conferencing programs, etc. It requires two network adapters in the PC connected to the Internet, one to the MODEM and the other to another PC via a crossover cable (http://duxcw.com/digest/Howto/network/cable/cable1.htm) or to a hub with a straight-thru cable as you have now. You would have to buy another adapter and cable.

Of the software I have tested, I have found that SyGate (http://duxcw.com/digest/Reviews/Network/sygate/sygate.htm) is the best NAT (it can also function as a proxy). The version of SyGate I reviewed requires two network adapters like Win 98 SE/Me ICS. The newest version is advertised to work with one network adapter in the host computer (the one running the NAT).

With a software solution you must have the host computer on for the other computer(s) (clients) to use the Internet. Most routers are small boxes running a specialized server that performs both NAT and firewall functions. With a router, only the router has to be on. The router is also easier to install, is generally faster, and has fewer problems.


5. RE: need help setting up home network with a hub.
cynthia38 Sep-05-01 11:42 PM
In response to message 4
cynth:))

Hello all thanks a lot for the response that you have shared in regards to my question. I have followed all the advise and it works well.

Still enjoying the forum very mush
cynth:)


| Home | Guides | How to | Reviews | Online Store | FAQ | Forums | Forum Archives |
| Links | News | Newsletter | About Dux | Advertising | Contact Info | Privacy |